High-performance configuration PROM: XCF32PFSG48C

Hedy · Dasenic Dec 12,2024 27

XCF32PFSG48C is an efficient and reliable configuration memory provided by Xilinx (now a subsidiary of AMD), which is specially designed to provide configuration support for Xilinx FPGAs and CPLDs. With its high-speed configuration capability, powerful error detection function, flexible interface selection and high reliability, it is suitable for a wide range of applications, including embedded systems, communication equipment, industrial automation, digital signal processing and automotive electronics. By working with Xilinx FPGAs, XCF32PFSG48C can ensure that the system starts quickly and stably, and efficiently executes design tasks.

XCF32PFSG48C Main Features

Storage capacity:

32Mb (4MB) storage capacity is suitable for storing configuration data of medium or small Xilinx FPGAs. This storage capacity is sufficient to support various complex logic designs and embedded system configurations.

Package form:

48-pin TFBGA Package, this package is compact and efficient, has good heat dissipation performance, and is very suitable for high-density integrated designs.

Interface type:

Mainly supports SPI (Serial Peripheral Interface) interface communication mode. SPI is a widely used serial interface that enables efficient configuration data transmission.

Also supports parallel interface, suitable for applications that require high-speed parallel data transmission.

Operating voltage:

The operating voltage range of 2.5V to 3.6V enables it to adapt to a variety of system design requirements and support different Xilinx FPGA operating voltages.

High transmission rate:

Supports high-speed SPI configuration mode, with a transmission rate of typically 50 MHz or higher, which can quickly load configuration data into the FPGA and reduce startup delays.

Long life and high durability:

Supports millions of programming and erasing operations, which makes it suitable for applications that require long-term stable operation.

Built-in error detection:

The built-in CRC check and error detection function during the configuration process ensures that the data is not damaged during transmission and improves the reliability of the configuration.

Reverse current protection:

Provides reverse current protection to prevent damage to the chip when the power supply is reversed.

Multiple programming interfaces:

Supports JTAG, SPI, and parallel programming interfaces, allowing developers to choose the most suitable programming method according to their needs, improving development and production efficiency.

XCF32PFSG48C Similar Comparison

XCF32PFSG48C vs XCF08PFSG48C vs XCF16PFSG48C vs XCF08PFS48C vs LPC1115FET48/303QL

ParameterXCF32PFSG48CXCF08PFSG48CXCF16PFSG48CXCF08PFS48CLPC1115FET48/303QL
Image
ManufacturerXilinx (AMD)Xilinx (AMD)Xilinx (AMD)Xilinx (AMD)NXP Semiconductors
TypeConfiguration PROMConfiguration PROMConfiguration PROMConfiguration PROMARM Cortex-M0 Microcontroller
Memory Capacity32 Mb (4 MB) 8 Mb (1 MB)16 Mb (2 MB)8 Mb (1 MB)Flash: 64 KB, SRAM: 8 KB
InterfaceSPI, ParallelSPI, ParallelSPI, ParallelSPIUART, SPI, I2C
Operating Voltage2.5V - 3.6V2.5V - 3.6V2.5V - 3.6V2.5V - 3.6V1.8V - 3.6V
Package48-TFBGA48-TFBGA48-TFBGA48-TFBGA48-TFBGA
Temperature Range-40°C to +85°C-40°C to +85°C-40°C to +85°C-40°C to +85°C-40°C to +85°C
Error DetectionCRCCRCCRCCRCNot applicable

XCF32PFSG48C PDF Datasheet


XCF32PFSG48C Advantages

High performance and high efficiency:

Through the high-speed SPI interface, XCF32PFSG48C provides a high configuration rate, reduces the delay when the FPGA starts, and improves the response speed of the system.

Flexible interface support:

Supports multiple programming interfaces (SPI, parallel, JTAG), providing flexible options to adapt to different designs and system requirements.

Powerful data protection:

Built-in CRC checksum and error detection mechanism ensure the reliability and integrity of configuration data, reducing configuration failures caused by data transmission errors.

Highly integrated:

XCF32PFSG48C integrates multiple functions, reduces the complexity of system design, reduces external component requirements, saves space and cost.

Long-term reliability:

The chip supports millions of programming and erasing operations, can work stably for a long time, and is suitable for applications that require high reliability.

Strong compatibility:

Applicable to a variety of Xilinx FPGA models, widely supporting various configuration requirements of the Xilinx series.


XCF32PFSG48C Typical Applications

FPGA Configuration:

XCF32PFSG48C is mainly used to provide configuration data for Xilinx FPGA. By reading the configuration data stored in the chip when the system starts, it can quickly load the program for the FPGA, so that the FPGA performs the predetermined logic function.

Embedded System Startup:

In embedded systems, XCF32PFSG48C can store startup code or operating system configuration files to help the system start quickly.

Communication equipment:

Used for configuration storage in communication systems to ensure that the system can complete initialization and work according to the set configuration at startup.

Industrial automation control:

In industrial automation systems, XCF32PFSG48C stores configuration data and ensures that the device can perform real-time control tasks according to the precise hardware configuration.

Digital signal processing:

Used in digital signal processing (DSP) systems to store signal processing algorithms and hardware configurations, supporting fast loading and execution of processing tasks.

Automotive electronics:

In automotive electronics applications, XCF32PFSG48C can be used as a configuration memory to ensure that the automotive control system can quickly and reliably load the required programs and configurations.


XCF32PFSG48C FAQs

1. What is the primary function of the XCF32PFSG48C?

The XCF32PFSG48C is a configuration memory used primarily for storing configuration data for Xilinx FPGA devices. It helps load the configuration into the FPGA during startup, enabling the device to function according to the user's design.

2. What is the storage capacity of the XCF32PFSG48C?

It has a 32Mb (4MB) storage capacity, which is sufficient for storing the configuration data for medium to large Xilinx FPGAs.

3. Which interfaces does the XCF32PFSG48C support?

The XCF32PFSG48C supports both SPI (Serial Peripheral Interface) and parallel configuration modes, allowing it to communicate with Xilinx FPGAs and CPLDs during configuration.

4. What is the voltage range of the XCF32PFSG48C?

The device operates within a 2.5V to 3.6V voltage range, making it compatible with a wide range of Xilinx FPGA devices and embedded systems.

5. What is the maximum data transfer rate for the XCF32PFSG48C?

The XCF32PFSG48C supports a maximum SPI clock speed of up to 50 MHz, which ensures fast configuration data transfer to the FPGA.

6. What kind of package does the XCF32PFSG48C come in?

The device comes in a 48-pin TFBGA package, a compact and efficient package that is ideal for high-density circuit boards.

7. How many program/erase cycles can the XCF32PFSG48C handle?

The device can handle more than 1 million program/erase cycles, which makes it durable and reliable for long-term usage in various applications.

8. Can the XCF32PFSG48C be used for other devices apart from Xilinx FPGAs?

While it is designed primarily for Xilinx FPGA configuration, it can also be used in other devices that require programmable configuration memory. However, compatibility should be verified based on the specific system design.

9. What are the key advantages of using the XCF32PFSG48C?

Key advantages include high speed, reliable data integrity (via CRC error checking), and flexibility in configuration modes (SPI and parallel). It is especially useful for FPGA-based systems that require efficient and fast configuration loading.

10. What is the temperature range of the XCF32PFSG48C?

The device operates within a temperature range of -40°C to +85°C, which makes it suitable for use in industrial and automotive environments.

11. How does the XCF32PFSG48C ensure data integrity?

The XCF32PFSG48C features CRC (Cyclic Redundancy Check), which ensures that the configuration data is transmitted and stored without errors, improving the reliability of the system.

12. How does the XCF32PFSG48C differ from the XCF08PFSG48C and XCF16PFSG48C?

The key difference is in the memory capacity:

The larger capacity versions (XCF32PFSG48C) are suitable for more complex FPGA designs, while the smaller versions are designed for smaller FPGA configurations.

13. Can I use the XCF32PFSG48C for non-Xilinx FPGAs?

The XCF32PFSG48C is optimized for Xilinx FPGAs and may not be directly compatible with non-Xilinx devices. It is important to ensure that the target FPGA or system supports the interface and configuration format used by this memory.


  • RFQ