ADM2587EBRWZ: Signal and Power Isolated Data Transceiver
ADM2587EBRWZ is an isolated RS-485/RS-422 transceiver chip produced by Analog Devices, which can be configured as half-duplex or full-duplex.
Microcontroller ATmega series: ATMEGA8A-AU Introduction
The ATMEGA8A-AU is a popular 8-bit microcontroller from Microchip Technology (formerly Atmel) and part of the ATmega series. It is based on the AVR architecture and is designed for a wide variety of embedded applications.
STM32F030K6T6 Development Board Introduction
STM32F030K6T6 is a microcontroller (MCU) based on the ARM Cortex-M0 core produced by STMicroelectronics.
MPU-6050: High-Performance 6-Axis Motion Sensor with I2C Bus Interface
The MPU-6050 is a widely used Inertial Measurement Unit (IMU) that combines a 3-axis accelerometer and a 3-axis gyroscope.
Texas Instruments TPS51200DRCR
The TPS51200DRCR is a high-efficiency dual-channel synchronous step-down converter produced by Texas Instruments (TI) and is commonly used in applications that provide regulated power, especially in systems that require low power consumption and high-efficiency power management.
STMicroelectronics STM32F103VET6
STM32F103VET6 is a 32-bit microcontroller based on the ARM Cortex-M3 core produced by STMicroelectronics. It belongs to the high-performance product line of the STM32F1 series and is widely used in embedded applications such as industrial control, IoT devices, and home appliance control.
STMicroelectronics STM32F105VCT6
STM32F105VCT6 is a versatile and powerful microcontroller that combines an ARM Cortex-M3 core with a rich set of peripherals and low power consumption. Its 128 KB Flash, 16 KB RAM, and extensive I/O options make it a suitable choice for a variety of embedded applications in industrial, automotive, and consumer markets. Its robust features, such as USB, CAN, ADC, and DMA, along with low-power operation, make it a solid solution for systems requiring real-time processing and efficient power usage.
Texas Instruments ULN2003ADR
ULN2003ADR is a common high current power driver produced by STMicroelectronics. It is a variant of the ULN2003 series and is usually used to control high current loads such as stepper motors, relays, solenoid valves, etc.
ATMEGA328P-PU
ATmega328P-PU is an 8-bit microcontroller manufactured by Microchip Technology (formerly Atmel), widely used in embedded systems and development boards, especially popular on the Arduino platform.
STM32F407VGT6 Microcontroller
TM32F407VGT6 is a powerful and flexible microcontroller suitable for a variety of embedded applications. Its high performance, rich peripheral interfaces and powerful processing capabilities make it an ideal choice for developing complex systems.
MCIMX6G2CVM05AB
MCIMX6G2CVM05AB is a powerful application processor that combines high-performance processing capabilities and rich multimedia functions, making it very suitable for a variety of embedded applications. Its low power consumption characteristics and flexible interface design enable it to perform well in various industrial and consumer applications.
STM32F405RGT6
The STM32F405RGT6 is a high-performance 32-bit microcontroller produced by STMicroelectronics. It is based on the ARM Cortex-M4 core and is suitable for embedded applications that require high performance and processing power.
STM32F030C8T6
STM32F030C8T6 is a powerful and affordable microcontroller suitable for a variety of low-power and low-cost embedded applications. Its flexible peripherals and diverse application areas make it a popular choice for developers.
ULN2803ADWR
Overview of ULN2803ADWR features, functions, similarities, pinouts and related Q&A
ULN2803A
ULN2803A integrated circuit working principle, characteristics, applications, similar, and related questions and answers
ADM2587EBRWZ: Signal and Power Isolated Data Transceiver
ADM2587EBRWZ is an isolated RS-485/RS-422 transceiver chip produced by Analog Devices, which can be configured as half-duplex or full-duplex. It is mainly used to provide data isolation and communication interface conversion, and is widely used in industrial automation, communication, automobile and medical equipment.
ADM2587EBRWZ Main features:
Isolation function: Provides electrical isolation up to 2500V, which can effectively prevent ground noise and transient voltage from interfering with the system.
Support for multiple communication protocols: Supports RS-485/RS-422 conversion, suitable for different application requirements.
High data transmission rate: The data rate can reach up to 500 kbps, which is suitable for most industrial communication applications.
Low power consumption: Compared with traditional isolation solutions, ADM2587E provides lower power consumption and higher performance, suitable for battery-powered and low-power design systems.
Wide operating temperature range: The operating temperature range is from -40°C to +85°C, adapting to harsh environments.
Package: Highly integrated, 20-lead, wide-body SOIC package, easy to integrate into various circuit board designs.
ADM2587EBRWZ Applications
Isolated RS-485/RS-422 Interfaces
Industrial Field Networks
Multi-point Data Transmission Systems
ADM2587EBRWZ Similar Comparison
ADM2587EBRWZ vs ADM2487EBRWZ vs ADM2484EBRWZ vs MAX13432EESD+ vs MAX13448EESD+
| Feature | ADM2587EBRWZ | ADM2487EBRWZ | ADM2484EBRWZ | MAX13432EESD+ | MAX13448EESD+ |
|---|---|---|---|---|---|
| Image |  |  |  |  |  |
| Manufacturer | Analog Devices Inc. | Analog Devices Inc. | Analog Devices Inc. | Maxim Integrated | Maxim Integrated |
| Package Type | 20-SOIC | 16-SOIC | 16-SOIC | 14-SOIC | 14-SOIC |
| Data Rate | 500 kbps | 500 kbps | 500 kbps | 250 kbps | 500 kbps |
| Isolation Voltage | 2500 V | 2500 V | 2500 V | 2500 V | 2500 V |
| Operating Voltage | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| Input Type | RS-485/RS-422 | RS-485/RS-422 | RS-485/RS-422 | RS-485 | RS-485 |
| Number of Isolated Channels | 1 (single channel isolation) | 1 (single channel isolation) | 1 (single channel isolation) | 1 (single channel isolation) | 1 (single channel isolation) |
| Operating Temperature Range | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C | -40°C to +125°C | -40°C to +125°C |
| ESD Protection | ±15 kV (contact), ±30 kV (air) | ±15 kV (contact), ±30 kV (air) | ±15 kV (contact), ±30 kV (air) | ±15 kV (contact), ±30 kV (air) | ±15 kV (contact), ±30 kV (air) |
ADM2587EBRWZ Pinout
ADM2587EBRWZ PDF Datasheet
ADM2587EBRWZ FAQs
1.What is the maximum data rate of the ADM2587EBRWZ?
The ADM2587EBRWZ supports a maximum data rate of 500 kbps, which is suitable for most industrial automation and control systems that require moderate-speed data transmission.
2.What is the operating temperature range of the ADM2587EBRWZ?
The chip operates in a temperature range from -40°C to +85°C, making it suitable for typical industrial and commercial applications. However, it is not suitable for high-temperature environments.
3.Is the ADM2587EBRWZ suitable for high-speed communication applications?
The ADM2587EBRWZ supports a maximum data rate of 500 kbps, which is suitable for moderate-speed applications. If you need higher data rates (e.g., for high-speed RS-485 communication), you might consider other options like the MAX13432EESD+ or MAX13448EESD+, which support speeds up to 5 Mbps.
4.What is the typical power consumption of the ADM2587EBRWZ?
The ADM2587EBRWZ is designed for low power consumption, making it suitable for battery-powered devices. The exact power consumption depends on the operating conditions, but it is generally in the range of a few milliwatts when idle and under load.
5.Can I use the ADM2587EBRWZ in battery-powered applications?
Yes, the ADM2587EBRWZ is well-suited for low-power, battery-powered applications. It operates within a low voltage range (3.0V to 5.5V) and consumes minimal power during operation.
6.What is the ESD protection level of the ADM2587EBRWZ?
The ADM2587EBRWZ offers ±15 kV of contact ESD protection and ±30 kV of air ESD protection, providing robust protection against electrostatic discharge, which is crucial in industrial and outdoor environments.
7.Can the ADM2587EBRWZ be used in medical devices?
Yes, the ADM2587EBRWZ is suitable for medical device applications that require electrical isolation to protect sensitive medical equipment from electrical surges, as well as for reliable data communication in medical systems.
8.What is the package type for the ADM2587EBRWZ?
The ADM2587EBRWZ comes in a 20-SOIC package, making it easy to integrate into most PCB designs.
